KWC  

F3E-Therm electronic thermostatic wall-mounted mixer

F3ET1001

2030032507 - F3ET1001 - F3E - F3E-Therm electronic thermostatic wall-mounted mixer

KWC  

F3E-Therm electronic thermostatic wall-mounted mixer

F3ET1001 2030032507

F3E-Therm thermostatic mixer DN 15 for wall mounting with lockable swivelling spout, for sanitary facilities. Opto-electronically controlled, triggered via hand movement. Thermostat with metal handle with adjustable and turn-proof temperature stop. With the option of manual thermal disinfection. For connection to hot and cold water. Control electronics, solenoid valve cartridge, 6 V lithium battery (CR-P2) and sensor in all-metal housing, high-polished chromium-plated brass. Laminar jet controller with integrated flow regulator 6.0 l/min. With adjustable connections with backflow preventer, strainers and screw rosettes. Projection 130 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control.

Product Specifications

with backflow preventer
yes
calculation flow rate cold wat
0.07 l/s
calculation flow rate hot wate
0.07 l/s
compatible A3000 open
no
default automatic hygiene flus
24h after the last activity
default flow time
10 Seconds
depressurised
no
with filter
yes
adjustable flow time
yes
functional principle
electronic self-closing
hygiene flushing
yes
diameter nominal
DN 15
inlet size
G 1/2 B
Locking mechanism
Top section, non-ceramic
material fitting
brass
maximum flow time
255 Seconds
minimum flow pressure
1 bar
minimum flow time
1 Seconds
type of mixing
with thermostat
number of batteries
1
Parameterization
remote control
Pop-up waste set
no
power supply connection
Battery 6 V
power consumption
1.5 Voltampere
Type of power supply
Battery
protective system IP
IP59K
with rosettes/cover plate
yes
protective shutdown
yes
sound insulation
no
Spout
rotating, bottom
spout projection
130 mm
surface finish fitting
chromed
surface treatment fitting
polished
temperature limit
yes
thermal disinfection
manual thermal disinfection
with transformer/power supply
no
type of batteries
CR-P2 Lithium battery 6V
type of mounting
wall mounting
type of operation
sensor operation
type of sensor
opto-electronic sensor
type of tap
bib tap
volume flow rate at 3 bar
0.1 l/s
water connection
S-unions
Accent colour
none
Basic colour
chrome-look (glossy)

With our proven Technologies and functions