F4ET-Med thermostatic wall-mounted mixer as DN 15 wall-mounted mixer, for wall mounting with lockable swivelling spout, for sanitary facilities in the healthcare and nursing sector. Opto-electronically controlled, triggered by hand movement with subsequent automatic switching to body detection. Thermostat with metal handle, including lever for reduced-touch operation, and adjustable, turn-proof temperature stop. With the option of manual thermal disinfection. For connecting to hot and cold water. Control electronics, stagnation-free hygiene solenoid valve cartridge, flow rate controller 9.0 l/min, 6 V lithium battery (CR-P2) and sensor in the scald-protected safe-touch housing, polished chromium-plated brass. Decoupled from the tap housing, volume-reduced, smooth water flow from low-lead brass (lead proportion ≤ 0.2%), and without nickel coating. With thermal insulation components to reduce heat transfer from the tap housing to the cold-water line. Self-emptying spout with laminar jet controller. With adjustable and lockable connections with backflow preventers and strainers, fully covered by depth-adjustable screw rosettes. 210 mm projection. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control.
KWC
F4ET-Med
Thermostatic wall-mounted mixer
F4ET1001
F4ET-Med thermostatic wall-mounted mixer as DN 15 wall-mounted mixer, for wall mounting with lockable swivelling spout, for sanitary facilities in the healthcare and nursing sector. Opto-electronically controlled, triggered by hand movement with subsequent automatic switching to body detection. Thermostat with metal handle, including lever for reduced-touch operation, and adjustable, turn-proof temperature stop. With the option of manual thermal disinfection. For connecting to hot and cold water. Control electronics, stagnation-free hygiene solenoid valve cartridge, flow rate controller 9.0 l/min, 6 V lithium battery (CR-P2) and sensor in the scald-protected safe-touch housing, polished chromium-plated brass. Decoupled from the tap housing, volume-reduced, smooth water flow from low-lead brass (lead proportion ≤ 0.2%), and without nickel coating. With thermal insulation components to reduce heat transfer from the tap housing to the cold-water line. Self-emptying spout with laminar jet controller. With adjustable and lockable connections with backflow preventers and strainers, fully covered by depth-adjustable screw rosettes. 210 mm projection. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control.
• F4LT-Med single lever mixer
wall-mounted mixers are fitted
with thermally insulating components which reduce the transmission of heat from the tap housing
to the cold water pipe
• the smooth water pipes, which
are decoupled from the housing,
reduced the water volume and
are made of low-lead brass (lead
content ≤ 0.2%) and have no nickel coating
Safe-Touch housing
Safe-Touch housing
Protection against scalding if the skin comes into contact with the valve body
Thermal disinfection
Thermal disinfection
• option to perform thermal disinfections
• manual or automatic (depending on the tap version)
Water hygiene flushing
Water hygiene flushing
Activated water hygiene flushing, factory-set
Battery operation
Battery operation
• portable function
• battery included in the scope of delivery
Statistical data storage
Statistical data storage
• automatic storage of hygiene-related functions in the electronics along with the date, time and frequency of use
• read via a bi-directional remote control from the accessory program
The new range of taps for healthcare. The range of taps from KWC Professional is welcoming some new additions. We present the new F4 range of taps for use in hospitals and care facilities.